close
Choose Your Site
Global
Social Media
English
| Quantity: | |
|---|---|
This embossed PVC protective tape delivers temporary surface protection for commercial construction, installation, and finishing projects. Manufactured with a polyvinyl chloride film backing and pressure-sensitive adhesive, the tape tears cleanly by hand and removes without leaving adhesive residue on most finished surfaces.
The tape uses an embossed PVC film as its backing material. The textured surface provides improved grip during handling and facilitates straight, even tearing by hand. The PVC film forms a physical barrier against dust, debris, light scratches, and liquid splashes encountered during renovation and assembly work.
The adhesive layer consists of an acrylic-based pressure-sensitive formulation. It applies with light finger pressure and maintains consistent hold on flat, vertical, and slightly curved surfaces. The adhesive is formulated to leave minimal transfer when removed within the recommended application period.
Parameter | Value Range |
|---|---|
Backing Material | Embossed PVC film |
Adhesive Type | Acrylic pressure-sensitive |
Total Thickness | 0.08 mm - 0.12 mm |
Standard Widths | 25 mm, 50 mm, 75 mm, 100 mm |
Standard Length | 20 m, 33 m, 50 m |
Peel Adhesion (to steel) | 1.5 N/cm - 2.5 N/cm |
Tensile Strength | ≥ 20 N/cm |
Elongation at Break | ≥ 150% |
Service Temperature | 0°C - 60°C |
Shelf Life | 12 months from production date |
Custom dimensions available upon request for commercial procurement orders.
The embossed PVC structure allows operators to tear the tape to desired lengths by hand, without scissors, knives, or cutting tools. This reduces setup time on job sites and eliminates the need to carry additional cutting equipment during installation work.
When removed within 30 days of application at room temperature, the acrylic adhesive separates cleanly from polished wood, painted drywall, stainless steel, glass, and laminated surfaces. Testing shows no visible adhesive transfer on non-porous substrates under standard indoor conditions.
The PVC film backing withstands regular foot traffic and contact with construction debris. It provides a dustproof seal and repels light water splashes, making it suitable for use during plastering, painting, and floor installation phases of a project.
The flexible PVC backing conforms to corners, trim edges, and slightly curved profiles. It adheres along edge details and contoured surfaces without lifting or bridging, providing continuous protection across complex surface geometries.
Contractors apply the tape to finished floors, window frames, and fixed fixtures during demolition, plastering, and tiling phases. It prevents dust accumulation and surface damage in occupied and newly finished spaces.
Cabinet makers and installers use the tape to protect countertop edges, decorative panels, and appliance surfaces during transport, handling, and on-site assembly. The low-tack adhesive avoids marring polished or high-gloss finishes.
Painters apply the tape along baseboards, door casings, and window trim to create clean paint lines. The hand-tear property allows for fast trimming around corners and irregular wall details.
The raw materials comply with RoHS directive requirements for restricted substances. The PVC film and adhesive formulations meet REACH SVHC screening standards for industrial tape products.
Production follows ISO 9001 quality management procedures. Each production batch undergoes thickness verification, peel adhesion testing, and visual inspection before packaging.
Standard stock widths include 25 mm, 50 mm, 75 mm, and 100 mm, with roll lengths of 20 m, 33 m, and 50 m. Custom widths and lengths can be manufactured for volume commercial procurement orders with a specified minimum order quantity.
Under indoor conditions at 20°C to 25°C and 40% to 60% relative humidity, the tape removes cleanly within 30 days of application. Longer application periods, higher temperatures, or porous surfaces may increase the likelihood of adhesive transfer.
The tape is formulated for use on glass, metal, polished wood, PVC window profiles, painted walls, ceramic tile, and laminated surfaces. We recommend testing on a small, inconspicuous area before full application on delicate or aged finishes.
Store rolls in their original packaging in a dry, ventilated area at temperatures between 10°C and 30°C. Avoid direct sunlight, high humidity, and contact with solvents or oil-based substances to preserve adhesive performance.
